| Q:
How do you restore the Black Powder Coat on the
engine? |
| A:
We use the engine Enhancer/Protector to restore the Powder
Coat. You spray it on a clean engine, and simply leave it. Then
wipe off any chrome or aluminum. |
| Q:
Is there something you can use to get boot off motorcycle pipes? |
| A:
Metal Finish will remove small amounts of boot and other
objects that often get stuck to your pipes. If it is a large
amount then we use Finish Off Stripper. You can spray
this on, allow to work, and then wipe off. You may need to apply
more than one coat depending on the amount of boot on the pipes
and the amount of time it has been there. Neither of these products
will harm your chrome. |
| Q:
How can you clean and care for Polished Aluminum? |
| A:
We have a two-part process, first you need to clean away all
the oxidation using Metal Finish; then protect it with
Protector (a resin based chrome/metal polish) |
| Q:
My rear wheel is hard to clean. Is there anything that can make
this job easier? |
| A:
Our #421 MPC cleaner will make this job much easier.
Simply wet down the bike when preparing to wash it, then spray
on the #421 MPC, allow it to work for a few minutes,
then wash bike as normal. Brake dust and contaminates will wash
right off. |
| Q:
I have Leather Saddlebags, is there something to keep them soft
and restore their color? |
| A:
By using our lanolin based Protectant your Saddlebags
will stay soft, waterproof and the natural color will remain.
Spray Protectant on the bags and buff to a soft luster. |
| Q:
How can I get rid of the swirl marks on my finish? |
| A:
For starters you do not want to get rid of the swirl marks!
You want to clean them out with Prep (Pre-Cleaner) to
get out excess dirt and old wax. Then use the Finish First
polish to fill them in. Remember everything you do to your car/motorcycle
finish should be done laterally just as your car/motorcycle
is painted. NEVER use a circular motion when working on your
car/motorcycle finish. This type of motion can cause swirl marks
and spider webs. |
| Q:
I have Aluminum Wheels and I need something to keep them clean.
What can I use? |
| A:
We have a two-part process, first you need to clean away all
the oxidation using Metal Finish; then protect it with
Protector (a resin based chrome/metal polish). |
| Q:
What can I use to degrease my engine? |
| A:
The #421 MPC cleaner will do a great job of degreasing
your engine. Wet down the engine (when it is cool), then spray
the #421 MPC on the engine, let it stand for a few minutes,
then rinse off. You can also add a lanolin-based protection
to the engine compartment by using the Engine Enhancer/Protector.
You simply spray this on after degreasing and leave it alone.
Wipe off any chrome or metals you may have in your engine. |
| Q:
I have a Vinyl Top. What do I need to clean and protect it? |
| A:
#421 MPC will clean the vinyl top. Spray the top down
with water and then spray #421 MPC on the top, let it
sit a few minutes; then scrub with a soft cotton cloth or soft
brush and rinse clean. Using the lanolin based Protectant
will protect your top. Spray it on the top and then wipe or
you can spray #421 MPC on a soft cotton cloth and apply
it this way. |
| Q:
Do you have something to make my tires look new again without
being greasy? |
| A:
Your tires need protection just like the rest of your finish.
Protectant will give your tires that brand new look and
protect them from cracking on the edges. Spray on and leave.
Wipe off the wheels or hubcaps. |
Accessories