| 1.
Wash vehicle with FINISH FIRST WASH & CONDITIONER |
| Wet
entire vehicle before washing. Pour approximately 2 capfuls
of FINISH FIRST WASH & CONDITIONER into wash pail. Fill pail
with water to activate suds. Use a soft wool wash mitt to apply
suds beginning on top surfaces and working down. Wash vehicle
and rinse in 4-ft. sections at a time. FINISH FIRST WASH & CONDITIONER
does not streak or smear like ordinary organic soaps, but smaller
washed areas generally rinsed better for maximum cleaning. Use
a separate mitt when cleaning wheels and wheel well areas. Completely
dry vehicle with The Absorber or a good soft chamois. |
| 2.
Prep Vehicle's paint surface with FINISH PREP Precleaner |
| Use
FINISH PREP Precleaner to remove organic wax or glaze residue,
bugs and tar, surface contaminants, or if applicable, stains
and oxidation. Apply FINISH PREP Precleaner to applicator pad
or soft cloth. Four half-dollar-sized drops will clean an approximately
2-sq. ft. area. Massage FINISH PREP Precleaner into this 2-ft.
area using light pressure only. FINISH PREP Precleaner cleans
by fluid emulsification, therefore hard rubbing or pressure
is not needed. Remove with a soft cloth while wet to achieve
maximum cleaning performance. Repeat over entire painted surface.
*Note-never apply FINISH PREP to a hot surface to avoid uneven,
premature drying emulsifiers. |
| 3.
Apply FINISH FIRST POLISH to cleaned vehicle surface |
| Place
4 dime-sized drops of FINISH FIRST POLISH on applicator pad
or a clean soft cloth. Wipe onto an approximately 2-sq. ft.
area using back and forth motion. Apply to entire vehicle's
painted surface at one time. A thin, even application of FINISH
FIRST works best. Using thick coats is wasteful and will cause
excess dust upon removal. Allow FINISH FIRST to "cure" a minimum
of 1 hour to overnight before removing. This important step
allows for maximum durability as well as filling of fine scratches
and swirl marks. During the curing phase, there is no such thing
as " too long", but we recommend a minimum of 1 hour. While
FINISH FIRST is curing, use this time to clean the interior,
tires, windows and other areas to complete the detailing process. |
| 4.
Clean and Protect the Interior |
| For
vinyl/leather surfaces that are heavily soiled or oily residue
from silicone based or organic surface products, use Liqui-Tech's
#421 MPC. This multi-purpose cleaner can be used on vinyl/leather,
cloth upholstery, convertible tops and carpets. #421 MPC deeps
cleans without leaving a residue that will actually attract
dirt, thus leaving these areas cleaner longer. On clean vinyl/leather
surfaces, use Liqui-Tech Protectant W/Lanolin to enhance and
protect these areas from dirt, dust, UV rays and contaminants.
LT PROTECTANT contains no silicone and will leave these surfaces
clean and oil free, but with maximum protection and enhancement. |
| 5.
Clean Windows |
| For
interior and exterior window cleaning and enhancement, use Liqui-Tech's
WINDOW FINISH. This ammonia-free formula cleans without streaks
and smears associated with ordinary glass cleaners. Mist onto
a small area and wipe with a soft cloth or towel, turning the
towel with each wipe. When WINDOW FINISH dries, apply a quick
bluff to bring up sparkle and slickness to glass. WINDOW FINISH
will enhance the tint on your tinted windows without hurting
the color or shade of the tint. WINDOW FINISH is tint safe,
it actually helps enhance the darkness of it and it will not
turn the tint purple. |
| 6.
Clean Tire and Wheels |
| Make
sure tires and wheels are cool to the touch! Wet tire and wheel,
then spray on #421 MPC. Scrub tires with a soft bristled brush
to remove dirt and brown, oily buildup usually found on tires.
Take a soft cloth and wipe wheel. Rinses tire and wheel and
dry thoroughly. If spots or cloudiness is present on wheels,
apply Liqui-Tech METAL FINISH Polishing Crème. This non-abrasive,
enzymatic cleaner removes contaminants and dullness without
scratching. Once the wheel surface is clean, apply Liqui-Tech
CUSTOM WHEEL/METAL PROTECTOR to create a durable, glossy shield
that protects against future buildup of damaging contaminants.
For protection and enhancement of tires, use Liqui-Tech Protectant
W/Lanolin. This non-silicone formula produces luster and protection
without being oily to the touch. |
| 7.
Remove FINISH FIRST Polish |
| After
the minimum of 1 hour has passed, remove FINISH FIRST with a
soft cotton cloth. Simply wipe off the haze to reveal a dazzling
shine and unsurpassed paint protection. Additional gloss and
protection can be achieved by adding multiple properly cured
coats of FINISH FIRST Polish/Finish. |
| 8.
Engine Enhancing/Detailing |
| After
your engine is cool spray water over the entire engine compartment.
Then spray #421 MPC over the entire compartment along with the
engine. While the #421 MPC is working take a damp soft cloth
and wipe the trouble areas. Raise the compartment well and let
dry. Once everything is dry you can mist ENGINE ENHANCER/PROTECTOR
over everything. This will enhance and protect everything under
your hood. The ENGINE ENHANCER/PROTECTOR is a Lanolin base product
that works great keeping your surfaces clean and waterproof.
The ENGINE ENHANCER/PROTECTOR also works great on The Rhino
Coat truck bed lining, Truck and Auto Frames, really Enhancing
the look of the lining while keeping the surface waterproof
and dust free. |
| 9.
For handy, quick cleanups and enhancement use FINISH FAST Spay
Enhancer |
| FINISH
FAST is excellent for paint or chrome to remove dust, bugs and
fingerprints. FINISH FAST will enhance gloss and shine to give
a "just polished look". This non-silicone formula can be
used in direct sunlight without fear of streaks or smears. |
Accessories