CAPTIAN LEE'S METAL PREP + CONDITIONER GALLON

Finish First - Cycle Finish - Liqui-Tech - Metal Finish

All Your Auto & Motorcycle needs.

Home About Us FAQ's Tesimonials Ordering/Shipping Detailing Motorcycle Detailing
»» Featured Listings «« Latest Listings Contact Us Events Schedule Admin

Home » Categories » Specials » protectors » Item# CLMP+Cgal

	CAPTAIN LEE'S SPRA' STRIP GALLON x 2
	It will not last but for this month! Here is enough to do a complete strip job on a vehicle with CAPTAIN LEE'S SPRA' STRIP is the original spray on paint stripper. Spra' Strip will quickly, easily, and safely remove paint from virtually any surface. It is excellent for the removal of all wheel coatings and paint from wheels & vehicles. • Made in the USA.

Search Listings

Auto Ease, Inc.
1417 North Pifer Road
Star Tannery, VA 22654
Phone: 540-465-8461
Contact Us

CAPTIAN LEE'S METAL PREP + CONDITIONER GALLON

Specials protectors Item Number: CLMP+Cgal - AD Number: ( 1193343616 )

CAPTIAN LEE'S METAL PREP + CONDITIONER GALLON

$31.00

Item Description

Metal Prep & Conditioner
After paint and rust have been removed, it is advisable to final clean the metal. Metal Prep is a cleaner and conditioner for metal. This product will remove light surface rust and properly etch the metal for better paint adhesion. It leaves a light coat of zinc phosphate to protect the metal from air and moisture. This barrier will ensure that rust does not develop under a new paint job.

Once the metal has been prepped, if necessary, the prepped metal may sit months or even years, (covered with a cotton sheet or cloth car cover and kept in a warm, dry environment) before priming and painting. Metal Prep delivers years of extra wear to a paint job.

Metal Prep is the extra step that truly makes the difference in a restoration project.

Methods of Application:

Apply Metal Prep to bare metal. Spray, brush or wipe Metal Prep onto metal surface. Scuff with a nylon scrub pad making certain the surface is smooth and clean. While wet with Metal Prep, wipe surface with a clean cloth in a smooth, even direction. Do not rub in a circular motion.
If there are rusty spots, soak by using a cotton chamois or folded paper towel and allow the area to sit from 20 minutes to 1 to 2 hours. Buff with a Scotch-Brite pad and rewet. Buff over the area again when all the rust is removed. Do not let it air dry, or it will turn black. Use a paper towel to dry, wiping in a smooth, even direction. Do not rub in a circular motion.

Allow 2 - 3 hours to cure if you plan to prime and paint immediately. Do not prime until you are ready to paint.

Metal Prep can be neutralized with water in case of an accident. Use plenty of water to thoroughly clean the area.

Wear gloves when using Metal Prep & Conditioner and protect eyes.

Do not use Metal Prep as a soak and do not dilute this product.